Levels can create on either elevation or section view
Elements create on levels are constrain, if level moves, element will follow
Project Browser - Elevations (Building Elevation) - North
The project has 2 existing levels: Level 1 and Level 2
Zoom-in to the level name
Click on the level name and rename it to 1st Floor
Rename the corresponding views - Click Yes
Rename Level 2 to 2nd Floor, change the level height to 5450mm
Architecture tab > Datum panel > Level
Draw panel > Pick Lines
Options bar - Offset: 3650
Move the cursor to 2nd Floor
Make sure the offset dotted line is above the level
Continue creating level until total of 10 levels
Options bar - Clear the Make Plan View option, Height: 1220
Ceate 1 additional level above the highest level
This level does not need a plan view
Click Modify to end the command
Rename the top level to Parapet, the level below to Roof
Continue to rename the other level to 3rd Floor, 4 Floor .... 8th Floor
Add another 2 level below 1st Floor
Rename them to Basement and T.O. Footing
Change the level height to -3000 and -3600
No comments:
Post a Comment